详解centos7中配置keepalived日志为别的路径

keepalived 安装:

cd <keepalived_sourcecode_path>
./configure --prefix=/usr/local/keepalived
 
make && make install
 
mkdir /etc/keepalived
mkdir /etc/keepalived/scripts
cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/
cp /root/keepalived-2.0.6/keepalived/etc/init.d/keepalived /etc/init.d/
cp /usr/local/keepalived/sbin/keepalived /sbin/keepalived
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
chmod +x /etc/init.d/keepalived

由于在默认状态下keepalived的日志会写入到/var/log/message中,我们需要将此剥离出来。

在centos 6下可以:

(1)首先修改/etc/sysconfig/keepalived文件,注释掉如下,添加如下:

#KEEPALIVED_OPTIONS="-D"
KEEPALIVED_OPTIONS="-D -d -S 0" 

(2)其次修改 /etc/rsyslog.conf 文件,添加如下:

local0.* /var/log/keepalived.log

在centos 7 下,还需要修改/lib/systemd/system/keepalived.service 文件:

centos 7使用。因为centos 7使用systemctl,通过systemctl调用service,所以需要修改/lib/systemd/system/keepalived.service文件。

将里面的:

EnvironmentFile=-/usr/local/keepalived/etc/sysconfig/keepalived
ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS

修改成:

EnvironmentFile=/etc/sysconfig/keepalived
ExecStart=/sbin/keepalived $KEEPALIVED_OPTIONS

然后重新加载service:

systemctl daemon-reload

整体的思路就是,

1. 通过systemctl start keepalived去启动;

2. 启动keepalived的时候,会去读service的配置文件:/lib/systemd/system/keepalived.service;

3. 在service的配置文件时:

3.1 启动文件路径ExecStart=/sbin/keepalived $KEEPALIVED_OPTIONS,即启动方式是带环境变量文件中参数来启动;

3.2 读取环境变量参数EnvironmentFile=/etc/sysconfig/keepalived。

4. $KEEPALIVED_OPTIONS参数是在/etc/sysconfig/keepalived的配置;我们配置的是KEEPALIVED_OPTIONS=”-D -d -S 0″;而-S是syslog的facility,0表示放在local0,在/etc/rsyslog.conf 中配置local0.* /var/log/keepalived.log

5. 所以,写日志就去/var/log/keepalived.log了。

赞(0)
声明:本网站发布的内容(图片、视频和文字)以原创、转载和分享网络内容为主,如果涉及侵权请尽快告知,我们将会在第一时间删除。文章观点不代表本网站立场,如需处理请联系客服。电话:028-62778877-8306;邮箱:fanjiao@west.cn。本站原创内容未经允许不得转载,或转载时需注明出处:西部数码知识库 » 详解centos7中配置keepalived日志为别的路径

登录

找回密码

注册